Hard Turning Inserts PCBN Cutters Light Interrupt Turning Gears With Keyway
1. Hard Turning Inserts ~ BN-H10 PCBN Cutters
| Insert Materials | Coating | Suited Materials | Machining Type | Typical Application | Insert Image |
| BN-H10 | Without Coating | Hardened Steel, High strength cast iron | Finishing | Bearings, Gears, Gear Shaft, High hardness component |  |
| BN-H10 C25 | With Coating |  |
2. BN-H10 PCBN Cutters Cutting Condition
- Coating: C25/C65/C75 or No Coating
- Binder: Al and TiN
- CBN Content: 50%
- Granularity: ≤1 μm
- Hardness: 2700~2800HV
- Machining Type: Continuour Turning ~ Light Interrupt Turning
3. Common Models of PCBN Cutters
4. Typical Application ~ BN-H10 PCBN Cutters Light Interrupt Turning Gears
| BN-H10 PCBN Cutters Light Interrupt Turning Gears Inner Bore |
| Machining Condition: Light Interrupt turning inner bore Material: 20CrMnTi Gears, HRC58-62 Selected Insert: BN-H10 CCGW09T304 Cutting Condition: ap=0.25mm, Fr=0.08mm/r, Vc=135m/min, Dry Cutting |  |
| Insert material | Cutting Speeds | Life Time | Efficiency |
| Halnn BN-H10 PCBN Cutters | 135 m/min | 1000 pcs | Improved 22% |
| Some Europe PCBN Cutters | 110 m/min | 600 pcs | ....... |
From above tablet, we can see that, the tool life improved 22% with Halnn BN-H10 PCBN Cutters.
5. Other Application of BN-H10 PCBN Cutters
BN-H10 PCBN Cutters are researched specific for machining hardened steel, it can be used for both continuous turning and light interrupt turning process.
We usually used PCBN Cutters for machining hardened steel component, such as gears, gear shaft, bearings,ect.
When the inner bore has keyway, it will belong to light-interrupt turning condition, and Halnn BN-H10 CBN Grade are researched specific for this type application. It also can be made with coating, which will have better surface than other pcbn cutters which don't have coatings.
Product Tags:
|
|
PCBN Polycrystalline Diamond Inserts Light Interrupt Turning Gears With Keyway Images
|
